Trail-Gear is now manufacturing a much needed OEM replacement component, and filled another need in the Toyota off roading industry. These are new bearing spindles for 1979-1985 Toyota Pickups and 4Runners (Hilux).

These spindles are manufactured from forged 4140 chromoly and then CNC machined for a perfect fit. Sold individually, these spindles are great when building or rebuilding a Rock Assault Housing, a Diamond Axle,an OEM axle, and Ruffstuff Specialties housings.

This is the seal that seals the front wheel bearings in the hubs against the spindle. This is not the inner axle seal. This is a seal that needs to be replaced anytime you remove your wheel bearings.

This is not a cheap seal as found in many knuckle rebuild kits, this is a high quality full steel encased, dual lip replacement.

These are sold individually.

Order qty. 2 for 1 Vehicle.

Fits:

1979-1995 Toyota Hilux Pickup Solid Axle

1976-1997 Landcruiser ????

Also you need these if you are putting IFS hubs onto a Solid Axle

These bolt on wheel spacers are designed to give you a little more width without changing out your axle for a wider one. Great for use on solid axles conversions to make the front axle similar in width the wider rear axle found on 86 and up Toyota trucks. Bolt pattern is 6 stud on a 5.5" round circle. Features safety graded studs and matching nuts for proper fit. Made from Billet 6061-T6 aluminum. Grade 8 Studs, Grade 10.9 nuts. Five sizes available. Shipped as a set of 2 spacers w/nuts. Every spacer features a precision machined surface. Only high quality nuts and studs that are hardness graded and stamped are used. Six lug wheel spacers fit Toyota Pickups, 4Runners, FJ-40, FJ-60 & FJ80

This is for a PAIR of spacers

True Trac limited slip for Toyota 8" V6 Differential. 

The True Trac limited slip uses a worm-gear design to bias torque from one tire to the other, providing extremely smooth operation. Since there are no clutches in this unit, there are no parts to wear out and no need to run limited slip additive in your oil. 

Fits:

1988-1995 Toyota V6 Rear Differential

WILL NOT WORK ON FJ80 FRONT

Details

29 Spline

Ring & Pinion Gear Sets from Sierra Gear & Axle are reasonably priced and are the highest quality aftermarket gear sets available. Sierra Gear Ring & Pinion Gear sets are engineered and manufactured for easy setup, quiet operation and long trouble-free life.

While most V6 trucks came with 1" master cylinders, 1979-1995 4 cylinder Toyota Pickups and 4Runners got left with a 7/8" cylinder.

TB-MC-HILUX   Stock Cylinder Found on V6 Equipped Pickups

V6 Master Cylinders are a direct replacement for your 4CYL variant. With larger drums, or with larger calipers, you may be finding that the pedal wants to go all the way to the floor.   

This master cylinder may need slight readjustment of the brake lines.  It is good to note that the front hole is for the front brakes and the hole closest to the booster is for the rear brakes.

2.0" Factory Series Bump Stop - 2" by Fox (983-02-091)

SOLD INDIVIDUALLY

FOX Bump Stops were created to provide additional bottom out control to maximize the vehicles entire suspension travel. Developed in conjunction with top offroad racing teams to achieve ultimate performance within a compact and light package. The FOX bump stop can easily be setup for any conditions by removing the aluminum Schrader cap and adjusting the internal nitrogen gas pressure. The long lasting and replaceable Delrin pad insures quiet operation.

Details

This is the Zip Air Locker for the Toyota 8" V6 Differential.

So you may ask, since it is cheaper than what we are used to, is it going to break?  Well, we can say this... the case is a forged chunk of 4320 chromoly to start.  

The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. 

The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. 

Locker Includes:

-Carrier Bearings for V6 Model (50mm ID Bearing)

-Switch with front and rear covers (So you can use the locker in the front or the rear of your truck)

-Nylon Line

-Seal Housing

-Quick Connect Air Fittings and Associated Adapters

-Zip Ties for Nylon Hose Routing

-Installation Instructions and Service Manual by Yukon Gear

Manufacturer Part Number: YZLTV6-30

Fits:

-Toyota 8" V6, or Turbo 4cyl Style Differentials found in 1986-1995 Toyota Pickup, Hilux, and 4Runner. (50mm ID Bearings)

-1996-2009 4Runner 8" Rear Differential without elocker.

-2007-2009 FJ Cruiser 8" Rear Differential with 50mm ID Carrier Bearings without Elocker.

-Toyota FJ80 Front High Pinion 8" Differential without Elocker.

-Toyota Hilux Pickup 1985-1997 with 50mm ID Carrier Bearings.

-Will not fit 2010+ FJ Cruiser and 4Runner.

-Will not fit non-elocking Tacoma 8.4" or T100 Differential.

-Will not fit elocking carrier found in Tacoma, 4Runner or FJ Cruiser.

If you are not sure on the differential you have, measure the carrier bearing Inner dimension, the V6 models are 50mm ID.

When installing a dual adapter, the position of the speedo output moves back about 6.5" from stock. We recommend using a speedo extension when connecting mechanical speedo cables to a dual adapter.

• 6-1/2" extension
• M22-1.5 thread

Ring & Pinion Gear Sets from Sierra Gear & Axle are reasonably priced and are the highest quality aftermarket gear sets available. Sierra Gear Ring & Pinion Gear sets are engineered and manufactured for easy setup, quiet operation and long trouble-free life.

 The spline on the Pinion for the flange is 29 Spline, if you have a 27 spline flange you will also need to purchase a 29 Spline Flange with Nut and Seal

Ring & Pinion Gear Sets from Sierra Gear & Axle are reasonably priced and are the highest quality aftermarket gear sets available. Sierra Gear Ring & Pinion Gear sets are engineered and manufactured for easy setup, quiet operation and long trouble-free life.

Will Fit the Following Models:

• 1969-1983 FJ40 front or rear
• FJ45 front or rear
• 1968-1979 FJ55 front or rear
• 1981-1987 FJ60 front or rear
• HJ60 front or rear
• 1988-1990 FJ62 front or rear
• BJ70 Leaf Srung Only (not coil sprung)
   
• 1990-1992 Landcruiser FJ80 Rear
• 1993-1997 Landcruiser FZJ80 Rear
• 1990-1997 Landcruiser HDJ80 Rear
• 1990-1997 Landcruiser HZJ80 Rear

Includes 1 Ring and Pinion Gear Set for one differential.

1986 and later Hilux pickup trucks and 4Runner feature larger vented rotors from the factory. Earlier 1979-1985 trucks used solid (non vented) rotors up front along with smaller calipers. If your installing a solid front axle on an 86 and later rig you will want to install a set of these vented rotors onto the axle. With these rotors you will be able use your existing larger IFS calipers. Simply unbolt your existing rotors and replace them with these vented rotors. Slight grinding of the rotors backing plate will be needed. Then simply install the IFS calipers right on to the solid axle using the factory bolts. These rotors can also be used on 85 and older trucks to increase braking effectiveness. Fits 81-85 Solid axles with 8 hole style rotors.

Price is per rotor. You will need 2 to do one axle.