If you are looking for some limit straps that won't break the bank, these are the ticket. Flexable, easy to install and great for those on a budget. Don't let the name fool you, they will work great for most people with lighter rigs like Suzuki's and Toyota's.

Limits suspension travel for vehicles with Coilovers, Air Shocks and Coils from overextending- causing damage to the shock and or suspension components. 

Industry Standard 1/2" Hole for Mounting, come in sizes from 12-32" as measured from center of hole to center of hole end to end.

Features:

-Abrasion Resistant Layer at End for Increased Tear Resistance

-Abrasion Resistant Loop for Increased Tear Resistance.

-Zinc Plated Ends for Corrosion Resistance.

-Double Sewn for High Strength. 

Details

Ratios   4.63       5.13

Details

Ratios   4.63       5.13

For ease of install and people who are on a budget, Powertrax Lockrights are hard to beat. Of course, selectable lockers such as ARB air lockers would be much more desirable, the Lockright lockers get the job done for a fraction of the cost. Many differentials have a set of spider gears which allow the outside tire to turn faster

Differential: Nissan H233B with 2 Pinion Carrier

Axle Spline Count: 31

Manufacturer: Richmond Gear/Powertrax

Part # 3210

Vehicle Applications:

• 1987-1998 Nissan Patrol GQ Y60 (Front)
• 1998-2009 Nissan Patrol GU Y61 (Front)
• 1987-1998 Nissan Safari (Front)
• 1988-1994 Ford Maverick (Front)
• 1978-1988 Nissan Patrol 160 MQ (Rear)

Features & Benefits:

•  Very easy installation as it fits inside of the stock open differential case
• No need to mess with ring & pinion set up in most cases
• Strong/Reliable
• Inexpensive price point

Manufactured in the U.S. using only high-strength chromoly materials, RCV Performance Ultimate CV Axle set simply replaces your weak Nissan Patrol Y60's axle shafts with a new high-strength design. The factory axles were designed with 31 splines at the differential, and neck down to 27 Spline at the CV creating a common failure point. This axle set upgrades the weak 27 splines at the CV to a 300M 30 spline race eliminating the need to neck down the shaft. Tests prove Ultimate CV Axles to be twice as strong as OEM shafts, and they're just as tough at a straight angle as they are at extreme angles. Even if you have big tires and big power there are no worries. Ultimate CV Axles are low maintenance and operate with a smoothness you can feel - whether off road or on the street. 

Axle set includes right and left inner axle shafts & 2 pregreased CV joints.

These bolt on wheel spacers are designed to give you a little more width without changing out your axle for a wider one. Great for use on solid axles conversions to make the front axle similar in width the wider rear axle found on 86 and up Toyota trucks. Bolt pattern is 6 stud on a 5.5" round circle. Features safety graded studs and matching nuts for proper fit. Made from Billet 6061-T6 aluminum. Grade 8 Studs, Grade 10.9 nuts. Five sizes available. Shipped as a set of 2 spacers w/nuts. Every spacer features a precision machined surface. Only high quality nuts and studs that are hardness graded and stamped are used. Six lug wheel spacers fit Toyota Pickups, 4Runners, FJ-40, FJ-60 & FJ80

This is for a PAIR of spacers

Manufactured in the U.S. using only high-strength chromoly materials, RCV Performance Ultimate CV Axle set simply replaces your weak Nissan Patrol Y61's axle shafts with a new high-strength design. The factory axles were designed with 31 splines at the differential, and neck down to 27 Spline at the CV creating a common failure point. This axle set upgrades the weak 27 splines at the CV to a 300M 30 spline race eliminating the need to neck down the shaft. Tests prove Ultimate CV Axles to be twice as strong as OEM shafts, and they're just as tough at a straight angle as they are at extreme angles. Even if you have big tires and big power there are no worries. Ultimate CV Axles are low maintenance and operate with a smoothness you can feel - whether off road or on the street. 

Axle set includes right and left inner axle shafts & 2 pregreased CV joints. 

2.0" Factory Series Bump Stop - 2" by Fox (983-02-091)

SOLD INDIVIDUALLY

FOX Bump Stops were created to provide additional bottom out control to maximize the vehicles entire suspension travel. Developed in conjunction with top offroad racing teams to achieve ultimate performance within a compact and light package. The FOX bump stop can easily be setup for any conditions by removing the aluminum Schrader cap and adjusting the internal nitrogen gas pressure. The long lasting and replaceable Delrin pad insures quiet operation.

For ease of install and people who are on a budget, Powertrax Lockrights are hard to beat. Of course, selectable lockers such as ARB air lockers would be much more desirable, the Lockright lockers get the job done for a fraction of the cost. Many differentials have a set of spider gears which allow the outside tire to turn faster

Powertrax Lock Right Locker

Differential: Nissan H233B with 4 Pinion Carrier (Not LSD Posi Case)

Axle Spline Count: 31 or 33

Manufacturer: Richmond Gear/Powertrax

Part # 3220

Tech Notes: This locker only suits standard open 4 pinion carrier case. It will not fit the LSD Positraction. The original side gears will get reused with this locker.

Features & Benefits:

Very easy installation as it fits inside of the stock open differential case

No need to mess with ring & pinion set up in most cases

Strong/Reliable

• 2000-2004 Nissan Xterra 6 cyl (Rear)
• 1998-2004 Nissan Frontier 6 cyl (Rear)
• 1998-2004 Nissan Navarra 6 cyl (Rear)
• 1996-2004 Nissan Pathfinder 6 cyl (Rear)
• 1987-1998 Nissan Patrol GQ Y60 (Rear)
• 1987-1998 Nissan Safari (Rear)
• 1988-1994 Ford Maverick (Rear)
• 1998-2009 Nissan Patrol GU Y61 (Rear)
• 2003-2006 Nissan Terrano II (Rear)
• 2003-2006 Nissan Mistral (Rear)
• 2003-2006 Ford Maverick (Rear)